A first-principles investigation on mechanical and metallic properties of titanium carbides under pressure

The titanium carbides are potential candidates to achieve both high hardness and refractory property. We carried out a structural search for titanium carbides at three pressures of 0 GPa, 30 GPa and 50 GPa. A phase diagram of the Ti-C system at 0 K was obtained by elucidating formation enthalpies as a function of compositions, and their mechanical and metallic properties of titanium carbides were investigated systematically. We also discussed the relation of titanium concentration to the both mechanical and metallic properties of titanium carbides. It has been found that the average valence electron density and tractility improved at higher concentrations of titanium, while the degree of covalent bonding directionality decreased. To this effect, the hardness of titanium carbide decreases as the content of titanium increases. Our results indicated that the titanium content significantly affected the metallic properties of the Ti-C system.     

水位骤降对下伏隧道堤防安全影响研究

建立了考虑水位骤降条件下的下伏隧道堤防模型,依托湘江某下伏隧道堤防工程,基于堤防边坡渗流原理,结合有限元应力计算,探讨了不同水位骤降速率下的浸润线情况,计算了堤防安全系数。研究结果表明:湘江水位骤降速率越快,浸润线变化范围越大,浸润线变化范围与水位降落速率成正比;湘江水位骤降速度在3 m/d^4 m/d,水位降到28.8 m时,堤岸失去稳定;水位骤降并非整个过程中堤岸均处于失稳状态,而是水位降至某高度后堤岸失稳,骤降速率增快对堤防安全系数有一定负面作用。研究结果对隧道下穿堤防建设具有一定指导意义。     

Theoretical and experimental studies of a new aniline derivative corrosion inhibitor for mild steel in acid medium

4-Chloro-N-(pyridin-2-ylmethyl)aniline (CPYA) was synthesized by a simple and inexpensive method and tested as a corrosion inhibitor in acid medium for mild steel by using gravimetric studies and electrochemical measurements. An average maximum efficiency of 96.0% was achieved at 4.59 mmol/L. Corrosion kinetic and thermodynamic parameters were also analyzed. Surface analyses (atomic force microscopy and scanning electron microscopy) show that protection is enabled by adsorption on the metal, forming a film. Quantum chemical calculations were performed to access information regarding the molecular structure in the corrosive medium and to support interpretation of the results obtained by experimental methods.     

探究一、二次风入射角度对炉内燃烧特性的影响

本文以某电厂600MW实际运行的一次再热机组为研究对象,重点研究一次风入射角度对炉内燃烧特性的影响,通过模拟计算确定典型工况下的最佳方案。该模拟的内容包括炉膛温度分布特性、组分分布特性、一次风二次风入射角度对各级受热面蒸汽参数的特性影响,为超超临界机组运行性能优化提供参考依据。     

基于ABAQUS的发动机缸盖工装强度分析

分析计算某型号发动机缸盖及工装的应力与局部位移,基于HyperMesh软件建立缸盖及工装的仿真模型,使用ABAQUS软件进行静力学计算,对处于夹紧状态下的发动机缸盖进行4个典型工位的加工工况分析计算,得出工件加工位置最大位移与工装所受最大应力。通过强度和位移校核,最终结果满足缸盖的加工需求,为工艺制定提供了有效的数据支持。     

采用绝热式自燃测试方法分析煤的自燃倾向

对煤的自燃倾向进行快速有效鉴别,有助于对煤的自燃倾向采取分级分类管理从而有效防治煤矿火灾,因而采用绝热式自燃测试方法对煤的自燃倾向进行准确分析很有必要。简要介绍绝热式自燃测试方法的测试原理及其仪器结构,模拟煤炭自燃的物理过程,通过采用包括反应器、气体预热铜管和跟踪温度控制方式等综合绝热措施以实现300 g煤样的自然发火实验,记录煤样从40℃上升到70℃的升温速率(或前30 h的升温速率),测试煤样的自燃特性曲线并分析曲线特征。即建立煤绝热氧化产热速率计算模型,结合实验数据计算所得的煤在绝热氧化条件下的升温速率和产热速率可鉴定煤自燃倾向性的强弱。采用绝热式自燃测试方法对不同煤的自燃倾向分析后表明,无烟煤和部分烟煤的自燃倾向较低,褐煤的自燃倾向较高,故而在煤矿开采时需特别注意褐煤的自燃倾向。     

天然气新型气液分离器性能试验研究

为了解决天然气含有饱和水汽和少量烃降低输气效率、堵塞管线和设备等问题,利用旋风子、稳流元件、叶栅式分离元件、折流板式分离元件组合成新型天然气分离器。利用相位多普勒粒子分析仪对新型天然气分离器进出口粒子粒径与液态水含量的进行对比测试,以研究新型分离器的分离效率。结果表明:新型分离器具有良好的气液分离作用;在流量为10～64 m~3/h时,分离器的分离效率成抛物线形式,在33 m~3/h时分离器的分离效率降到最低值95.16%,主要原因是流量在33 m~3/h时,试验气液混合不均匀,导致内部流态紊乱,以至于试验测得分离效率相对偏低;在流量为10 m~3/h时分离器分离效率最高,为99.29%;分离器对该进口条件的气体中雾状液粒有较高的分离作用,且可以明显降低分离器出口气体中液粒的平均粒径;从进口到气相出口压力逐渐降低,总压降为950 Pa;流动区域速度梯度大不利于气液相分离,流动掺混会导致分离效率降低。     

某尾矿库调洪计算

调洪计算在尾矿库设计和运行管理中都是非常重要的，水量平衡是常用计算方法，涉及较多的插值计算与试算。为了提高计算效率和计算质量，在利用Excel强大数据处理功能的同时，采用VBA编程方法实现计算过程自动化。降低了人工插值和试算对计算结果的影响，提高了工作效率。计算过程清晰，通用性强。     

A comparative thermodynamic analysis of Kalina and organic Rankine cycles for hot dry rock: a prospect study in the Gonghe Basin

Hot dry rock is a new type of geothermal resource which has a promising application prospect in China. This paper conducted a comparative research on performance evaluation of two eligible bottoming cycles for a hot dry rock power plant in the Gonghe Basin. Based on the given heat production conditions, a Kalina cycle and three organic Rankine cycles were tested respectively with different ammonia-water mixtures of seven ammonia mass fractions and nine eco-friendly working fluids. The results show that the optimal ammonia mass fraction is 82% for the proposed bottoming Kalina cycle in view of maximum net power output. Thermodynamic analysis suggests that wet fluids should be supercritical while dry fluids should be saturated at the inlet of turbine, respectively. The maximum net power output of the organic Rankine cycle with dry fluids expanding from saturated state is higher than that of the other organic Rankine cycle combinations, and is far higher than the maximum net power output in all tested Kalina cycle cases. Under the given heat production conditions of hot dry rock resource in the Gonghe Basin, the saturated organic Rankine cycle with the dry fluid butane as working fluid generates the largest amount of net power.     

630℃超超临界二次再热塔式锅炉热力特性与壁温耦合计算研究

630℃超超临界火电技术作为下一代超超临界发电技术,对于煤炭资源的节约、发电机组的经济性以及环境改善,都显示了优越性。目前630℃超超临界锅炉的热力计算还缺乏相关研究。本文以某1000MW超超临界二次再热塔式锅炉布置方案为例,将锅炉管道、炉膛、高温受热面作为串联管路计算,在工质侧将热力计算与管路计算进行耦合建立数值分析模型。该计算模型能够同时得到比实现水动力和热力计算更精细的结果,对后续700℃工程持续优化提升做好技术储备。